ATTN. PIX 240 Users: Please know that while the PIX 240 is a discontinued product, its only difference from the PIX 240i is the screen; therefore, all PIX 240i firmware and documentation about new features and functionality still applies to the PIX 240.
For more information about this firmware update, view "Full Detail - Features and Changes" below.
The User Guide is also available as a free download.
It is highly recommended that users update to the latest version of firmware available as soon as possible.
Last update - (v3.53) January 7, 2016
Video Devices PIX 240i firmware - (v3.53) provides the following new features, changes, and/or fixes.
- Rare image complexity issues could cause dropped or corrupt frames.
- Some OWC Mercury Extreme Pro 6G SSDs were failing to format, and reporting "Format failed."
3.52 - Posted Nov 18, 2014
Sony File Name Format for Sony PMWF55 (240(i) Only)
New Sony File Format naming option available in Main Menu>File Storage>File Name Format. When selected and the incoming SDI signal source is the Sony PMWF55, the PIX 240(i) generates files that follow the same naming convention used by F55 camera.
The PIX 240(i) extracts the Camera ID, Reel number, and Camera position and names the files accordingly and uses this information to create a reel folder.
The Sony PMWF55 has two options for file naming:
- CamID and Reel (supported).
- Title (unsupported).
When set to Cam ID and Reel the naming convention is:
[Camera ID][Reel Number][Camera Position][Clip Number]_[YYMMDD][UniqueID].
The PIX 240(i) file names will be identical to the F55’s and they will be placed in a Reel folder derived from the Sony F55’s CamID and Reel.
- Non-alphanumeric characters are blocked from use in DRIVE, REEL and SCENE. (240(i)).
- Fixed incompatibility with some AVID workstations where AVID would report Hagrid Base Error when loading AMA Linked 240(i)-generated DNxHD files. (240(i)).
- The PIX is now more forgiving when mounting media with corruption. In some cases, depending on the level of corruption, the PIX would show drives as "No Fmt". A common cause of this sort of corruption was termination of the data connection during a write cycle when the drive was connected to a computer. Drives with this sort of corruption will now mount correctly but the corrupted file(s) may not playback correctly or the PIX may report them as corrupted. (240(i)).
- Unacceptable levels of noise on embedded audio channels 1 and 2 at the SDI output when recording standard definition video. (240(i)).
- Leading or trailing spaces in Reel names would make the folders invisible to Mac OS. (240(i)).
- Various improvements and system enhancements for stability and usability. (240(i)).
Any PIX 240(i) recorded files from any version newer than 3.50 cannot be played back in PIX 240(i)/PIX 220(i) v3.03 or earlier.
The change is due to a new enhanced QuickTime structure in the PIX 240(i)'s Firmware (v3.50 and newer), which enables the recording of dynamic metadata (metadata that changes from frame to frame).
3.51 - Posted May 19, 2014
- Added ability to enter/exit menus using a USB keyboard’s arrow keys. Right Arrow opens a menu item; Left Arrow returns to the previous menu.
- Increased efficiency of DNxHD Codec at lower bit rates.
- Accuracy of timecode overlay on video outputs improved.
- Simplified the [Timecode/Sync] [Sync Out] menu by removing unnecessary drop frame and non-drop frame options. [PIX 240(i) only].
- Simplified the [Video] [Up Conversion] menu by removing the redundant ‘Zoom Letterbox’ setting. The ‘Zoom Wide’ setting has the same effect.
- Fixed AVID AMA-linking ‘EXCEPTION: Failed to get the sample position from the AMA plugin.’ bug. This could appear towards the end of clip playback or when consolidating odd length files.
- Pillar Box and Zoom 14:9 setting names swapped so that the setting name correctly matches the selected conversion.
- Other system optimizations.
3.50 - Posted March 5, 2014
- Added option for long duration event recording with no file splits - Splits Disabled (10 Hours Max).
- Added automatic file recovery in the event of total power loss during recording. Maximum last 30 seconds lost.
- Added support for Canon C300 3:2 pull down mode.
- Added options for displaying thinner audio meters in various parts of the main screen (top, left, bottom, right) so that more of the video image can be seen.
- Added Record/Playback of camera movement/tracking data via HD-SDI including camera position, pan, tilt, roll, focus distance. Supports SMPTE S315M metadata specification.
- PIX 240(i) Only - Added support for Source Identification (SID) metadata to enable large scale productions to identify source video streams. This SID metadata is transmitted in the SDI stream ancillary data space as defined in SMPTE 291M from devices such as the Alpermann+Velte Rubidium Series. The PIX 240(i) extracts and records this SID metadata into the QuickTime file structure so that it can be played back from the PIX 240(i)'s SDI output. Note: This enhanced metadata support has required changes to the QuickTime structure.
- PIX 240(i) Only - Added 24h Run timecode mode which automatically loads the time of day into the accurate timecode generator. Saves having to jam TOD manually.
- PIX 240(i) Only - Added Free Run Auto Mute and 24h Run Auto Mute timecode modes. The 'Auto Mute' modes are the same as the Free run and 24h modes, but mute the LTC timecode output when stopped. This can be used to roll external devices when Rec run timecode is not suitable e.g. multi-cam shoots.
- PIX 240(i) Only - Added new Ext TC (LTC Halt) mode. If unit is set to record trigger from rolling timecode then the unit will now stop if the incoming signal disappears. This is useful when triggering from devices that do not output stationary code when stopped.
- Added support for wireless mini USB keyboard remote control, Rii, RT-MWK01.
- DNxHD codec optimizations for even greater image detail.
- Now loads the last recorded take after power up.
- IMPORTANT CHANGES introduced in firmware 3.50 prevents files recorded on firmware revision 3.50 or higher from playing back on PIX recorders running firmware earlier than 3.50.
- Random speckle artifacts when doing a PsF to P conversion with high motion material.
- Non-seamless audio at file splits.
- USB keyboard Lock Ups.
- Rare issue where certain ProRes files would flash during playback.
- PIX 240(i) Only - 'Interlacy' playback of PsF files when no SDI video input connected.
- PIX 240(i) Only - Random, occasional SDI timecode offsets.
- Random 'No input signal detected' messages when pressing record.
- Potential ExFAT corruption ('No Fmt') after going full.
- Issue where deleting the first file of a multi-file take removes the take from the file list.
- Various AV sync issues.
3.03 - Posted December 13, 2013
Sound Devices PIX 220(i) and PIX 240(i) Video Recorder Firmware - Aurora (v) provides the following new features and changes.
- Stability fixes.
3.02 - Posted July 1, 2013
- Drives are now formatted as exFAT instead of UDF. It is still possible to record and playback from PIX UDF drives.
Fixes & Changes
- RGB (4:4:4) full range values now always recorded and output with full dynamic range instead of legal range.
- Occasional random file splits and corruption due to loss of lock to incoming SDI
- Occasional random file splits due to incorrect reading of SDI embedded timecode
- Fixed a rare issue where A-time would freeze on zero at record start and would require a reboot.
- Fixed issue where custom menu settings would reset after a power cycle
- Other minor bug fixes and system improvements
3.01 - Posted March 8, 2013
- Fix: two missing lines when scaling from progressive to interlaced
- Fix: a rare problem where image could become corrupt with nine images within the same frame
- Fix: lockup due to rapid re-plugging of the USB keyboard
- Fix: 1080i50 HD-SDI input interpreted incorrectly as 1080PsF25
- Fix: no SDI out timecode during playback without video input connected
- Fix: timecode hold-off not canceling when timecode stops during hold-off period
- Fix: random rec start/stop with FS700 and timecode trigger mode
- Fix: various other bug fixes and system improvements
- 3G-SDI output is now full 12-bit
- SDI input now compatible Sony F55
3.0 - Posted December 26, 2012
- Added: 4:4:4 (RGB or YCbCr) 10-bit or 12-bit support. Compatible with 4:4:4 1920x1080 output from Canon C500, Alexa and Sony F3
- Added: ProRes 4444, 12-bit codec
- Added: 3G-SDI on video I/O BNCs. Both Level A and B supported on input. Level A only on output.
- Added: SDI Output Type menu for switching output between HD 4:2:2 and 3G 4:4:4
- Added: Menu option for displaying timecode and transport status overlay on SDI and or HDMI outputs.
- Increased: Audio delay range to 500ms
- Fix: PsF to P conversion artifacts.
- Fix: In Timecode Rec Start/stop mode, PIX not triggering off external timecode when set to freerun.
- Fix: Drop Frame was default TC frame rate with no incoming Timecode on SDI.
- Fix: Horizontal flip now does not flip the OSD, only the image
2.01 - Posted August 24, 2012
- New: Support for Alexa SDI filename metadata
- New: 16x and 32x shuttle speeds
- New: Ability to customize and playback a play list
- New: Added Playback modes including Play All, Play All-Pause, Play All-Loop, Play List, Play List-Pause, Play List-Loop
- New: HD->SD aspect ratio conversion including Letterbox, Crop, Anamorphic
- New: SD->HD aspect ratio conversion including Anamorphic, Pillar Box, Zoom Letterbox, Zoom 14:9, Zoom wide
- New: Keyboard shortcuts for transport and other features
- New: Input Delay to Output menu for enabling/disabling whether the audio input delay setting affects the line output.
- New: Horizontal Flip Display. Note that this also flips the OSD, so it is recommended to turn off the OSD in this mode.
- New: Support for Samsung 830-series 256/512GB SSD
- Change: Timecode system enhancements including jamming on 00 frame
- Change: Timecode frame rate determined by File Resolution/Rate rather than Video Input rate.
- Change: Stuck button alert added to notify if a button has got stuck.
- Fix: Drive remaining time being reported incorrectly for Standard Definition / ProRes configurations
- Fix: Intermittent LCD flashing during high speed playback of long files
- Fix: Current settings lost on reboot after loading factory defaults
- Fix: SDI TC output fixed for 720p59.94/60 video.
- Fix: Various other bug fixes and enhancements.
2.00 - Posted April 16, 2012
- New: LCD Monitor Menu with Exposure Assist, Focus Assist and Flip Display features.
- Exposure Assist includes False Color and Zebra Stripes options and is activated using LCD + FILES buttons
- Focus Assist includes Peaking Filter and Edge Enhance algorithms. Activate Focus Assist using LCD + MENU buttons
- New: 1:1 Pixel Mapping Zoom function to further aid focusing of HD video. Activate using LCD + AUDIO.
- New: Image brightness, contrast, and chroma adjustments in LCD popup menu. Only affects signal on the PIX LCD.
- New: Support for Standard Definition recording and playback
- New: Ability to create and delete cue markers using the FILES button during recording or playback
- New: Locate to cue marker function using Rewind and Fast Forward keys
- New: Loop Play mode allowing looping from start to end of a clip or between consecutive cue markers
- New: Support for Analog + SDI/HDMI audio input combinations
- Fix: Miscellaneous bugs
1.09 - Posted April 4, 2012
- Fixed: Issue with ProRes files which could produce 'banding' of the image with very low-level exposures.
1.08 - Posted March 26, 2012
- New: Ability to start and stop recording from external, record-run timecode while the timecode mode of the PIX recorder is set to freerun or 24hr run timecode mode. This is useful when working with cameras that only support SDI timecode but not SDI start/stop flags and when the application calls for free-run timecode rather than rec-run timecode (i.e. any application where multiple devices are TC jammed).
- Change: Drop frame timecode is displayed with semi-colon between second and frames field.
- Change (PIX 240): Freerun timecode backup when all power is removed reduced to 2 hours.
- Change (PIX 240): TC LED blinks red to inform user to re-jam or reset freerun timecode. This will happen when the timecode backup has reset after 2hrs or if a change in video frame rate affects timecode.
- Change: SSD and CF OSD fields can now be toggled individually.
- Change (PIX 240): Video Input factory default changed to SDI (240 only); Timecode Mode factory default changed to Ext TC (SDI, HDMI).
- Change (PIX 240): 24h Run Timecode Mode replaced with new "Jam Time of Day" menu. This is a more reliable way to maintain ultra-accurate TOD timecode over power cycles.
- Fix (PIX 240): Tri-Level Sync Out issues resolved.
- Fix: RED EPIC boot up with PIX attached could cause corruption in PIX recordings.
- Fix: Lock button menu (press FILES + MENU) no longer wraps around.
- Fix: Play-Pause or shuttle mode causes top line artifact in LCD with interlaced input.
- Fix: OSD File Resolution/Rate field now always shows the File Resolution/Rate setting even when there is no video input.
- Fix (PIX 220): HDMI intermittent record triggering from Sony NXCAM 1080i50 video.
- Fix (PIX 240): +1 frame offset on rec-run stationary timecode over SDI.
- Fix: -2 frame start timecode offset in recorded file when receiving stationary Ext TC.
- Fix (PIX 240): SDI output timecode glitch when Record button is pressed.
- Fix (PIX 240): Timecode output falls behind the OSD and SDI Output timecode when in rec-run mode.
- Fix: Rec-run timecode was not continuous from file to file.
- Fix: More reliable handling of loss of video input: When video input is lost, PIX recorder stays in record-pending until video signal reappears, then resumes recording into a new file. 10 second timeout has been removed.
1.07 - Posted February 22, 2012
- New: Files List organized by Reel Folder for faster navigation of recordings. Press the encoder to expand or collapse Reel folders.
- New: Files List displays files faster.
- New: File Skip: Ability to quickly skip to the next or previous file with a short press of the REW (<<) or FFWD (>>) buttons, respectively.
- New: Playback mode - a new sub-menu in the System menu:
- Play Once: when finished playing the current file, switches back to Live mode
- Play Once - Pause: when finished playing the current file, pauses on the last frame. This is useful for quickly rewinding and checking the last few seconds of the file again.
- New: False Take function: Press STOP + REW (<<) buttons simultaneously to delete the last recording and automatically decrement the clip and take numbers.
- New (PIX 240): Outputs timecode and record start/stop flags from the SDI output. To record start/stop a slave PIX, set the slave PIX to 'SDI Flag - PIX' in the System/Rec Start/Stop menu.
- New: Record mode can be instigated during playback.
- New (PIX 240): Drop Frame Enable sub-menu in the Timecode/Sync menu. Forces drop frame timecode when in freerun or 24hr run timecode modes.
- New (PIX 220): HDMI timecode can be read from Sony FS100, and other Sony NX cams. (PIX 240 already supported this feature in v1.03)
- New (PIX 220): Record start/stop triggering via rec-run timecode from Sony FS100, and other Sony NX cams. (PIX 240 already supported this feature in v1.03)
- New: While a drive is mounting, orange text 'Mounting' is displayed in the drive status field.
- Change: Remove timeout on LCD/Button backlight popup. Simply press the LCD button to hide the LCD popup.
- Change: LCD color space adjustments to slightly reduce washed out look.
- Fix: PIX UDF formatted disks now quickly mount and unmount from MAC OSX computers.
- Fix: Drive activity orange indicator not staying on long enough for cached data to be fully written to disk. Could cause corruption if disk was removed too quickly after a recording. Always wait until the orange indicator turns to white before removing drives.
- Fix: Field inversion when playing back 1080i files locked to an incoming 1080i video source.
- Fix: Color inversion on SDI output with scaler set to 720p23.976/24
- Fix: Wrong TC frame rate displayed when setting scaler to a PsF rate
- Fix: QuickTime wrapper missing 2 padding bytes causing incompatibility with AutoDesk Smoke
- Fix: On very long recordings, video starts to lag behind audio when 3:2 pull-down removal is activated. Lag could be about 15 frames over 1 hour.
- Fix (PIX 240): Pulling HDMI during recording causes video input to reset to SDI
- Fix: Drive remaining time calculated incorrectly during playback and scaler on.
- Fix: Invalid Path when playback is instigated after deleting the current file.
- Fix: Improvements to prevent current settings randomly resetting to factory settings after a power cycle.
- Fix: Other minor fixes and enhancements.
1.05 - Posted December 12, 2011
- Fix: DNxHD macroblock artifacts in low light conditions.
- Fix (PIX 240): Random incorrect start timecode in quicktime file.
- Fix: Audio signal is no longer lost when removing the video input.
- Fix: PIX will now report "No media present." when trying to format a CF or SSD that is not mounted.
- Fix: Horizontal image tearing in recorded file when converting SD to HD.
- Fix: General improvements to system robustness.
- New: Input PsF Detect option adds the ability to force the PIX 220 or PIX 240 to interpret PsF video signals that incorrectly present as 1080i to be treated as 1080PsF.
- New (PIX 240): SDI flag - Panasonic (Varicam) rec start/stop mode specifically for use with Panasonic Varicam that uses different protocol for flags than other Panasonic cameras.
1.04 - Posted December 2, 2011
- fix Bug in which some files could be corrupted during recording or would not play back correctly.
1.03 - Posted November 16, 2011
- New (PIX 240): SDI Record start/stop flag for Canon, Sony, Arri cameras
- New (PIX 240): HDMI timecode can be read from Sony FS100, and other Sony NX cams
- New (PIX 240): Removed timecode mode Ext TC, and added modes: Ext TC (LTC) and Ext TC (SDI, HDMI)
- New: Ability to edit visibility of Setup Menu Items and alter Factory Defaults
- New: Button lockout - press MENU and FILES simultaneously
- Fix: Bug with converting PsF to progressive video at some resolutions
- Fix: Avid import issue - fixed blank frame at end of recording
- Fix: Lockup related to entering Shuttle Mode immediately upon power up
- Fix: 1080i59.94 vs 1080PsF29.97 detection on input
- Fix: Faster programming speed (this will be apparent on subsequent updates)
- Fix: quicker playback response at HDMI and SDI (PIX 240) outputs
- Fix (PIX 240): Issue where SDI monitors would occasionally lock onto wrong rate and display improper signal
- Fix (PIX 240): Color swap on SDI output with 720p23.976/24 output
- Fix (PIX 240): Red One - SDI flags now work upon first power up of Red
- Fix (PIX 240): Timecode output now present while in Shuttle Mode
- Fix (PIX 240): SDI audio output now works properly with Panasonic and Plura monitors
- Fix (PIX 240): Field inversion at SDI output with 1080i59.94 input and scaler set to 1080PsF29.97
- Fix (PIX 240): Jamming Timecode from SDI now works
- Fix (PIX 240): Drop frame signal now detected from SDI
1.02 - Posted October 7, 2011
- New: added menu item "File Storage->When Drive is Full" - to configure drive switch-over behavior
- New: added option "SDI Flag - Panasonic" to menu item "System->Rec Start/Stop" - for Panasonic cameras
- New: added menu item "System->Test Signal Generator" and "System->Audio Tone Level" - audio tone generation to outputs
- New: LCD can now be turned off entirely by holding down LCD button
- New: Vari-speed Playback Mode on rotary encoder while in play (hold FF and REW button for FF and REW)
- New: added menu item "System->Shortcuts" - reference for button shortcuts
- New: message appears when frame rate changes, as a reminder to re-jam timecode
- New: added File Resolution/Rates for progressive segmented frames (1080PsF30, 1080PsF25, and 1080PsF24)
- Change: menu item "File Storage->Record to" changed to "Primary Drive"
- Change: Rec Run Timecode value is now stored across power cycles
- Change: MENU button now locked out during PLAY
- Change: removed "48k" from OSD
- Fix: field inversion when used with 1080PsF input signals (Sony F3 etc)
- Fix: remaining drive space is now properly recalculated after file deletion
- Fix: reads metadata on the SDI stream from the Red One camera
- Fix: audio on files imported into Adobe Premiere 5.5 now has no problems
- Fix: rare freeze caused by inserting and removing the CF card quickly
- Fix: rare bug which caused the LCD screen to go blank
- Fix: improvements to USB keyboard functionality
- Fix: 1-pixel blue line when scaling up from NTSC and PAL.
- Fix: power cycle of an SDI-connected camera will now reconnect video signal properly
- Fix: play/pause bug in which the frame would appear garbled
- Fix: various low-level bug fixes improving stability
1.0 - Initial Release
Please read and follow the steps below carefully. You may want to print them before upgrading firmware.
Sound Devices recommends backing up any existing data that may reside on the recorder. While no data on the storage is changed during the update process, it is best practice to back up the unit. It is also highly recommended to save the current device settings since a firmware update can result in settings changing to factory default.
Prepare to Update
- Download the firmware's .zip file.
Note: Some web browsers (most notably, Safari) will open certain files automatically while downloading them. Doing so has caused corruption with archive files including .zip files. Sound Devices recommends to either use a browser that does not do this, or to disable the feature before downloading.
- From the zip archive, extract the .prg file.
- Copy the .prg file to the root level of an SSD in a PIX-CADDY, CF memory card or HDD. The card or SSD must be formatted as an exFAT volume. (The storage medium should be formatted by PIX.)
- Power the recorder from external DC. Do not perform the update with an unstable power source.
- Insert the SSD, CF card or HDD with the .prg file.
- Power on the recorder.
- Once booted, push the MENU button to open the Main Menu. Turn the Control knob to highlight System, and then press the Control knob to select it.
- Turn the Control knob to highlight Update Software, and then press the Control Knob to select it.
- Once a prg has been selected, you will need to reconfirm that the file selected is the correct one. Select Yes to proceed with the firmware update or select No to exit the Software Update. The unit will take a few minutes to update the firmware, indicating its progress. When the update is finished, the unit will present a dialog indicating it will shut down. Accept this dialog to complete the update process.
- Review settings after updating.
Note: Should problems occur during the update process, then PIX Loader can be used to update the unit.
Applying Update Using PIX Loader Software
- If you haven't previously done so, Download the PIX Loader utility for Windows. Otherwise skip to step 2.
PIX_Loader_1.0_Install.exefrom the downloaded .zip file.
Extract the PIX_Loader_1.0_Install.exe from the downloaded .zip file.
- Double-click the installer to begin the installation process. A UAC (User Account Control) dialog may appear asking your permission to allow the installer to run. Allow it.
- The InstallShield wizard will guide you through selecting an install location and actually installing the Pix Loader utility. When finished, the PIX Loader utility will be located in the Windows Start Menu.
- Attach a fresh set of batteries or connect the PIX to external DC power. Do not perform the update with low batteries or unstable power sources.
Turn the PIX off.
- Using a USB standard A to mini-B cable, attach the mini-B plug to the jack on the PIX recorder labeled FACTORY and attach the standard A plug to a working standard A jack on the computer.
- Using a thin tool (a bent paperclip works well), carefully push the button recessed within a hole adjacent to the FACTORY jack on the PIX. The PWR LED on the front of the PIX will illuminate amber.
- Open the PIX Loader software.
- Press the Browse button and locate the .prg file. Highlight the file and press Open.
- Press the Program button to begin the update. Do not remove any cables or close the PIX Loader utility until this process is complete.
- When the utility is finished, unplug the USB cable from the PIX recorder and remove the power. The firmware is now updated.
- Review settings after updating.